Wheels

Reasonably priced repair or replacement wheel for a children's Bicycle

Reasonably priced repair or replacement wheel for a children's Bicycle

Reasonably priced repair or replacement wheel for a children's Bicycle

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

- 20". - Rim: Double Wall Large Black. - Hub: black - Spokes: Pillar stainless black. - Axle 14mm or 3/8. - Holes: 36.

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

FRONT: - Features: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Rampage double-wall rim (PVC rim strip included). - Axle: 3/8" chromoly (Heat-treated). - Hardware: Steel (17mm wheel nuts). - Hub shell bearings: 6000 (x2) Verify bearing number on side of rubber seal. - Spokes: 187mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished, or Limited Edition colors. - Weight: 32.5oz. REAR: - Features: Four bearing sealed cassette hub w/ 14mm Chromoly axle. Hand laced to a 36 hole Rampage double-wall rim, 9T Chromoly driver w/ 3-pawl system. - Axle: 14mm chromoly (Heat-treated). - Driver: 1-pc chromoly RHD or LHD. - Driver bearings:6802 (x2), Verify bearing number on side of rubber seal. - Driver pawls: 3 Pawl. - Driver springs: Wraparound (x1). - Hardware: Steel(17mm wheel nuts). - Hub shell bearings:6902 (x2) Verify bearing number on side of rubber seal. - Spokes: 183mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished or Limited Edition colors. - Weight: 45.4oz.

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT200 (Black), Shimano logo, M9x100mm - Rear hub: Shimano FH-MT200-B (Black), Shimano logo, M9x141mm BOOST141 - HG Freehub compatible with 8 - 10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Quick Release binders included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- 14mm hub - 9T Driver - Aluminum Silver Rim

- Quality entry-level 27.5'' MTB disc brake wheelset with 100mm / 141mm QR axle spacing - 141mm O.L.D. rear wheel is the quick-release version of the Boost spacing & a growing standard in entry level MTB - Tubeless-ready Alex MD19 rim is strong and lightweight (470g) - Shimano MT200 hubs feature adjustable cup-and-cone bearings for trouble free long term performance - 32 black stainless steel spokes and brass nipples for long term reliability - Shimano HG freehub body, compatible with most 8 to 10 speed cassettes and some 11 and 12 speed MTB cassettes. See "Documents and links" for more details on compatibility.

The Shimano Tiagra WH-RS100 Clincher Wheelset is a durable and affordable clincher wheelset, built to withstand many miles of training and communiting. The WH-RS100 are Shimano's most affordable 11 speed wheelset that offer comfort and versatility at a competitive price point. Features: 17mm wide-profile rim offers comfort and reliability Wide-flange hubs deliver a strong wheel and drive rigidity High-quality sealing protects easy-to-maintain cup-and-cone bearings Wheelset includes rim tape Road tubeless technology lets you set up wheels tubeless with compatible tires and sealant (not included) Rear wheel is Shimano HG 10/11-speed compatible (spacer required for 10-speed cassettes) Designed for rim brakes

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

Reasonably priced repair or replacement wheel

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-M475 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

A tough, tubeless-compatible 27.5-inch disc wheel built around Center Lock hubs but shipped with handy 6-Bolt adapters for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 100mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 956g

- Alex MD21 double wall 26'', disc specific rim, Black - Shimano M475 hubs - For All-Mountain and Cross-Country - Tubeless Ready - Inner rim width: 21mm - Outer rim width: 26mm - Rim height: 18 mm - Rim weight: 450 g - With eyelets - Schrader Valve - 32 holes - Sapim Leader Stainless spokes—Black

- Size: 29". - Rim: Black Anodized. - Hub: Black disc. - Spokes: Black Pillar Stainless. - 36H. - With eyelets. - Presta Valve.

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Shimano FH-MT400 (Black), Shimano logo, 12mm E-THRU, O.L.D. 142mm - Rear hub (2): Shimano FH-MT4050 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Rear Quick Release binder included (FH-MT4050) - E-THRU Axles not included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

A tough, tubeless-compatible 27.5-inch disc wheel built around Center Lock hubs but shipped with handy 6-Bolt adaptors for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 135mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Shimano freehub: 8/9/10/11sp MTB compatibility - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1161g

Wider and lighter. 19C wide-profile rim provides better performance with wider tires • More than 100 g lighter than previous model (WH-RS170) • SHIMANO quality and technology • Rigid 12 mm axle for both front and rear • E-THRU • Reliable disc brake system • CENTER LOCK mount • 140 mm disc brake rotor compatible • 28 spokes

High quality sealing Cup & Cone Bearing Sprocket and 10-speed Cassette Sprocket 11-speed freehub compatible with 11-speed Cassette Lower inertia while maintaining stiffness and rigidity for acceleration and speed To improve the driving rigidity for better acceleration feeling SPOKE FINISH Black WHEEL SIZE 700c RIM MATERIAL Aluminum FREEHUB BODY MATERIAL Steel AVERAGE WEIGHT F(982g),R(1177g) AXLE FIXING METHOD QR NUMBER OF SPOKES 28,28/28 SPEEDS 10*/11 RIM WIDTH 23 FRONT REAR PAIR Front,Pair NIPPLE FINISH Silver DISC MOUNT Center Lock Disc NIPPLE MATERIAL Brass FREE HUB SEAL TYPE -,Contact TIRE TYPE Clincher HUB SEAL TYPE Contact RIM HEIGHT 24 AXLE MATERIAL F-Steel,R-Steel RIM JOINT Sleeve RIM FINISH Anodized (Black Rim),Painted (White Rim),Anodized SPOKE MATERIAL Stainless Steel BRAKE TYPE Center Lock Disc O L D 10,100/135 RECOMMENDED TIRE SIZE 25-38c QR SKEWER LENGTH -,F-QR133MM,R-QR168/173MM

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

Shimano WH-MT620 - 29 Inch Front Wheel - Centerlock - 15x110mm Boost The Shimano WH-MT620 wheels bring robust performance to any trail. The aluminum Tubeless rims feature double butted J-bend spokes that are laced to hubs with Centerlock brake disc mounts and deliver fast acceleration for more fun on the trail. The Boost version with a wider over locknut dimension of 110 mm offers better maneuverability for an aggressive riding style. At the same time wheel rigidity is improved providing higher traction for better cornering and climbing. The MTB front wheel is perfectly suited for combination with components of the Shimano SLX M7100 series. Technical details of the Shimano WH-MT620 Boost front wheel Material: rim, hub: aluminium (painted) axle: steel spokes: stainless nipples: brass Rim: 29 inches width: 34.7 mm (external) / 30 mm (internal) profile height: 19.8 mm Tubeless compatible Hub: O.L.D.: 15 x 110 mm (Boost) Centerlock brake disc mount cone bearings with labyrinth and contact seals Spokes: 24, J-Bend, double butted

Wider and lighter. 19C wide-profile rim provides better performance with wider tires • More than 100 g lighter than previous model (WH-RS170) • SHIMANO quality and technology • Rigid 12 mm axle for both front and rear • CENTER LOCK mount • 140 mm disc brake rotor compatible • HG freehub for 8/9/10/11 speed cassette

High Quality, Low Price The perfect quality wheels without breaking the bank. When you’re shredding a bush trail you can’t afford to worry about how your bike’s going to respond. Shimano designs their mountain bike components so they do what you want them to, instantly. SHIMANO: A Long History of Innovative Research Shimano MTB components are backed by a long history of innovative research, from aerodynamics to ergonomics and resulting in smooth, precise, shift changes, a drivetrain system with loss-free propulsion, and a braking system with high reliability. Together, they let the rider concentrate on the ride, for stress-free enjoyment. Shimano components are designed for people who love cycling, in every part of the world. High Performance Technology, Affordable Price Shimano MT600 mountain bike wheels bring high performance technology to an affordable price point. Fitted with a mount for the Centrelock disc brake rotor system, you’ll save time and effort when changing out rotors during maintenance or for transporting your bike. Precision Bearings Angular contact bearings used in the hub are designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenance. Quality Build Shimano’s MT600 Wheels are built using aluminium rims with a welded join, 24 stainless steel spokes with aluminium nipples and Shimano’s legendary build quality, ensuring confidence in your bush trail endeavours. Better Grip A 24mm inner rim width spreads the tyre out to increase the contact patch and give you significantly better grip. Sound Choice Shimano’s MT600 wheels are a sound choice for the cyclist looking to replace or upgrade their wheel set.

Shimano Deore XT WH-M8120-TL - 29 Inch Front Wheel - Centerlock - 15x110mm - Boost Shimano Deore XT M8100 - The world is your canvas. The original MTB group continues its legacy of remaining the standard for mountainbikers everywhere. Nearly three decades in, the Deore XT brand is defined by its trail-tested durability, reliability and performance. As mountainbiking becomes faster and faster and the terrain even more technical, the M8100 series aims to give the rider the necessary feeling of confidence and safety. Following the principle of passing on the experiences and technologies of the top series, the Deore XT incorporates the innovations of the high-end XTR components. Accordingly the new 12-speed groupset features of course Micro Spline and Hyperglide+. The Shimano Deore XT WH-M8120-TL 29 inch front wheel is characterized by a faster acceleration which amplifies riding excitement. While doing so 28 double butted J-Bend spokes ensure the wheel's stability making it very tenable and reliable. The front wheel's 15 mm E-Thru axle offers compared to quick release axles 15 % more torsional and 25 % more transverse shear stiffness allowing dependable high-speed cornering. Last but not least the wheel features a Centerlock disc brake mount. Version for 15 x 110 mm E-Thru Boost axles. Included in delivery: without thru axle Manufacturer item code: EWHM8120LFEBD9X Material: Aluminium ||| Stainless Steel Weight supplement: weighed by Bike24

Great performance and great fun on or off the road. The perfect quality wheels without breaking the bank. When you’re flying down a back woods trail you can’t afford to worry about how your bike’s going to respond. Shimano designs their mountain bike components so they do what you want them to, instantly.

Shimano Deore XT WH-M8120-TL Rear Wheel - 29" | Centerlock - 12x148mm - Boost Shimano Deore XT M8100 - The world is your canvas. The original MTB group continues its legacy of remaining the standard for mountainbikers everywhere. Nearly three decades in, the Deore XT brand is defined by its trail-tested durability, reliability and performance. As mountainbiking becomes faster and faster and the terrain even more technical, the M8100 series aims to give the rider the necessary feeling of confidence and safety. Following the principle of passing on the experiences and technologies of the top series, the Deore XT incorporates the innovations of the high-end XTR components. Accordingly the new 12-speed groupset features of course Micro Spline and Hyperglide+. The Shimano Deore XT WH-M8120-TL 29 inch rear wheel is characterized by a faster acceleration which amplifies riding excitement. While doing so 28 double butted J-Bend spokes ensure the wheel's stability making it very tenable and reliable. To provide dependable Trail performance the rear wheel uses a 12 mm E-Thru axle. Last but not least the wheel features a Centerlock disc brake mount and the Micro Spline freewheel which makes it possible to install Shimano 12-speed cassettes. Micro Spline The aluminium freewheel with 22 evenly spaced teeth keeps the cassette firmly under control for immediate response and also allows the use of a 10 teeth sprocket. In addition, the smaller and compared to the usual Hyperglide freewheel bodies more extensive gearing prevents rotor damage. Version for 12 x 148 mm E-Thru Boost axles. Included in delivery: without thru axle Manufacturer item code: EWHM8120LREBD9 Material: Aluminium ||| Stainless Steel Weight supplement: weighed by Bike24

Give 'em your worst Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability. Rough And Rowdy Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready. Balance is Key Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life. No Frills, All Thrills The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps

The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with a 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires

Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

Comfort joins speed. PR 1600 wheels work perfectly with wider tires, which results in more comfort in the saddle and more grip on the road. These wheels excel on any terrain, transfer every bit of energy into forward momentum and take every corner with Swiss precision. - 350 based Spline hub - Straight-pull hub and spokes are radial laced - Includes steel RWS skewer, tubeless ready tape and tubeless valve

Give 'em your worst Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability. Rough And Rowdy Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready. Balance is Key Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life. No Frills, All Thrills The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

Are you already planning your next bikepacking trip? The GR 1600 wheels are made for gravel adventures and all those unique experiences one can find far away from the tarmac and the rest of the road cycling community. A super durable aluminum wheel made of reliable components that supports you for endless miles of troublefree riding pleasure. Ready to explore the world? With the GR 1600 you definitely are. - 350 based hub