Skip to main content

Filter By:

Mobility

$1,374.00
Optimized Design Geared Hub Wheel Motor Kit with Down Tube Water Bottle Mount Li-Ion Battery. Suitable for: - Commutes with extreme road condition - Bicycles with triangular frame and water bottle mounting screws - People above 100lbs weight - Ultra high-performance high torque and fast - Continuous up-hills with 7-15% road grade - Below 7Kg powerful and high range electric bike 350W Nominal, 500W Max Power, 32km/h, rear hub motor, Small size with simple structure, light weight and long life, super power, high efficiency, beautiful, high speed motor with gear, drive is very free and fluent, best choice for Li-ion battery on e-bike. - Only accepts cassettes - Motor Type: DC Brushless Geared Hub Motor - Motor Power: 550/350W Max/Nominal - Voltage: 36V - Max Torque: 60Nm @17A - Efficiency =80% - 36 Spokes - Flange for disc brake - Waterproof connector - Axle=135mm, Diameter=138mm. - Weight=2.9kg - Phase angle 120 degree - Manufacturer: MXUS - CE, EN15194 certifications Material: - Wheel, A356 Aluminum - Magnet, 38SH - Wire(winding), QZ-3/155 - Iron core, DW470 - Bearing, C&U ENVO Battery 36V 12.8Ah - Li-Ion 36V 12.8Ah - Energy : 460Wh LCD3 17A Controller System - LCD display and computer, - Motor Controller 36V 17A, - Thumb Throttle, - Pedal Assist Sensor, - Brake cut-off magnetic switches, - Rain proof Controller and tools bag, - Zip ties, cable shield and installation accessories Interface: - LCD3 meter provide you with a variety of functions such as vehicle controls and vehicle status digitized displays to meet the trip demands. - Pedal Assist System (PAS) optimized to simulate the torque sensor. This computing system provides Speed limit PAS or Torque limit PAS levels from 0 to 5. - Trip time display (with displays of a single trip time (TM) and total trip time (TTM)); - Trip speed display (with displays of real-time speed (Km/H or MPH) and a single maximum speed (MXS) and a single average speed (AVS)); - Trip distance display (with displays of a single trip distance (DST) and total trip distance (ODO)); - Display of turned on handlebar; - Display of power-assist startup; - Power assistant ratio (or handlebar) gear (ASSIST) switch; - 6Km/H power assistant push function; - Cruise function (CRUISE); - Battery capacity indicator; - Real-time battery voltage (VOL) display; - Motor power and temperature (MOTOR) display; - Brake display; - Turn on backlighting and lights ; - Environment temperature display; - Data clearing; - Fault code display; - User parameter setting - 5' large screen - Rubber clamp spacer is provided for 3 handlebar bore sizes: 22.5mm, 25.4mm, 31.5mm - easy key button, easy control, - waterproof housing with good appearance Motor Controller: - Brushless Motor Controller - Voltage: 36V - Min Voltage: 30+-0.5V - Max Current: 17+-1A - Speed Set: 1-4.2V - Angle: 120 - Brake Input: Low-Level Thumb Throttle: - Haul effect sensor, Analogue linear increasing torque Pedal Assist Sensor - 2 pieces 12 Magnet easy assemble Pedal Assist Sensor, - Just stick the sensor, no need to disassemble the crank. - this sensor is compatible with optimized PAS controlling systems and provide the best pedal assist performance, rapid response and torque sensor simulation. Brake cut-off magnetic switches - Just stick the magnet sensors, no need to disassemble the brake levers. - it cuts-off the motor when you brake PLEASE NOTE: This kit needs installation. It may be purchased on it's own and installed by the customer, however warranties can be void if installed improperly. Contact us for installation details and for bike compatibility.
Page 1 of 1