Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Hubs

SRAM MTH 746 Rear Hub
$146.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
Stan's NoTubes 3.30HD 9mm Thru Axle Hub Kit
$33.54
The 3.30HD 9mm Thru Hub Kit makes Stan's 3.30HD front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Shimano Saint Front Hub
$129.99
From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.
SRAM Predictive Steering Hub
$334.00
SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.
SRAM X0 Thru Axle Rear Hub
$494.99 - $510.00
Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement—all while keeping everything light and steady. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. From pawl tooth to side cap, SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - DOUBLE TIME ratchet mechanism for durable, quick engagement - SPEEDBALL precision cartridge bearings for light, smooth action. No play adjustment needed for simplicity and convenience - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes - 150mm version includes 12x150mm & 12x157mm endcaps
SRAM X0 Front Hub
$267.99 - $277.00
Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - SPEEDBALL precision cartridge bearings for light, smooth action - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes
Shimano Alfine Centerlock Dynamo Hub
$159.99
Shimano Alfine Centerlock Dynamo Front Hub - Compatible with 26 to 28" wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Center to Flange: 28.5 R , 20 L - Color: Black - Defined Color: Black - Flange Diameter: 70 R , 70 L - Front Axle: QR x 100mm - Hub Drilling: 32, 36 - Hub/Brake Compatibility: Center-Lock Disc - Spoke Interface: J-Bend - Weight: 575 g
Shimano Alfine S7001 11-Speed Disc Brake Rear Hub
$554.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible
Shimano Dura-Ace Track Hi-Flange Rear Hub
$204.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
Shimano Dura-Ace Track Hi-Flange Front Hub
$194.99
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30Ti Hubs)
$219.99 - $268.40
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes 3.30R/3.30RTi Freehub Body
$149.99
Replacement freehub body for Stan's NoTubes 3.30R and 3.30RTi rear hubs.
Chris King R45 Cassette Lockring
$75.00 - $80.00
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
Chris King ISO SD Front
$514.50
The Chris King ISO Small Diameter (SD) front hub is designed for mountain bikers seeking a lightweight hub that doesn’t compromise performance. Milled from solid bar stock, the high flange diameter grants the use of shorter spokes and a wider bracing angle to increase wheel strength. Proven by professionals and chosen by privateers, our ISO SD hub puts you in the race with legendary Chris King performance. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight - Easily convertible between standard QR and 15x100mm axles
Shimano Dura-Ace Track Low-Flange Front Hub
$169.99
• Model Number: HB-7710-F • Series: DURA-ACE • Over Locknut: 100mm • Axle Type: 142mm • Stainless Steel Ball Bearings: stainless steel • Contact Sealing: Dust Cap • Spoke Holes: 28/32/36 • Spoke Hole Circle: 38mm • Hub Shell: aluminum • Center to Flange (Right): 37mm • Center to Flange (Left): 37mm • Average Weight w/o QR: 203g
Shimano Dura-Ace Track Low-Flange Rear Hub
$194.99 - $214.99
• Super polished Bearing Races • Spoke Holes: 36/32/28H • Model Number: HB-7710-R • Series: DURA-ACE • Over Locknut: 120mm • Axle Type: 164mm • Stainless Steel Ball Bearings: stainless steel • Contact Sealing: Dust Cap • Spoke Holes: 28/32/36 • Spoke Hole Circle: 44mm • Hub Shell: aluminum • Center to Flange (Right): 32.25mm (singe) / 33.5mm (double) • Center to Flange (Left): 34.75mm (single) / 33.5mm (double) • Average Weight w/o QR: 298g (w/o lockring)
Sturmey-Archer 8-Speed Drum Brake Rear Hub
$264.99
- Internal gear 8-speed hub with 70mm drum brake - Rotary gear selection with no protruding indicator chain or switch box - Direct drive in first gear allows use of smaller chainwheels - A356 aluminum hub shell with 13/32" slotted solid axle (185mm overall axle length) - Gear ratio range of 325% - Includes 3-spline 23 tooth cog and a TSS86 twist shifter. Brake lever sold separately
Shimano Deore XT M756A 10-Speed 6-Bolt Disc Rear Hub
$69.99 - $70.99
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
Shimano Deore M6000 Centerlock Front Hub
$36.99
Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze. - Hub/Brake Compatibility: Center-Lock Disc - Axle Type: QR - Axle Length: 100mm
Shimano XT Boost Rear Hub
$109.99
- Series : DEORE XT - Disc Rotor Mount : Center Lock Disc - Axle Type : 12mm thru-axle - Axle : 12x148mm - Contact Sealing : Labyrinth & Contact - Spoke Holes : 32H
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$54.99
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Stan's NoTubes 3.30/3.30Ti Hub Kit
$24.99 - $29.99
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Stan's NoTubes 3.30HD 15mm Hub Kit
$31.99
Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Crank Brothers XD Driver Body
$149.99
- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body
WeThePeople Arrow Front Hub
$142.99
An evolution of their world-renowned Supreme hubs, the WeThePeople Arrow hubs are a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. The 7075-T6 alloy axle and knurled CNC machined cones help keep this hub incredibly light, and give it a super smooth look unlike any other front hub on the market.
WeThePeople Supreme Front Hubs
$124.99
The partner in crime to WeThePeople's Supreme Rear Cassette Hub, the matching Supreme Front Hub uses high-quality Japanese sealed bearings and a beefy, heat-treated 4130 chromoly axle held on with 10mm female bolts. Match it up with WTP nylon fiberglass Supreme front hub guards and you have a dialed front-end setup. - 14mm hollow/hardened heat treated chromoly axle - 10mm female bolts
Chris King ISO B Front
$514.50
Chris King ISO B 110x15 front hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, ISO hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Optimized flange angle/alignment for improved spoke path, and symmetric wheel build - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight
Chris King R45D Rear
$960.50
R45D hubs combine our low-drag 45-tooth RingDrive system, a lightweight hub body, and our legendary made-in-house bearings. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the superior responsiveness of our RingDrive engagement system when you put the power down. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available
Profile Design Shimano Freehub Body - Twenty-Four Series
$159.99
Replacement Shimano / SRAM Freehub body for a Twenty-Four Series road rear wheel (11-speed).
Shimano Ultegra Hubs
$84.99 - $149.99
Shimano's Ultegra Hubs are flag-bearers for high-durability, smooth-rolling performance. Hardened steel cup-and-cone design use stainless steel bearings for minimal drag and superior ease of maintenance. Shimano's Digital Adjustment System makes hub maintenance fast, simple, and reduces axial force on the bearings, reducing wear and tear on the hub internals.
Page 1 of 3 Next page