Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

We The People Raptor Grips
$19.99
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
KMC Chain Link 1/2
$3.95
- Regular chain link - 1/2” x 1/8” single speed
Generic Bottom Bracket Kit for One Piece Crank
$15.95 - $17.95
Bottom bracket kit for one piece crank
BSD Forever Chain
$26.99 - $27.99
- 1/2" x 1/8" - Single-speed - BMX Racing, Freestyle
Stolen 20
$114.99 - $159.95
FRONT: - Features: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Rampage double-wall rim (PVC rim strip included). - Axle: 3/8" chromoly (Heat-treated). - Hardware: Steel (17mm wheel nuts). - Hub shell bearings: 6000 (x2) Verify bearing number on side of rubber seal. - Spokes: 187mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished, or Limited Edition colors. - Weight: 32.5oz. REAR: - Features: Four bearing sealed cassette hub w/ 14mm Chromoly axle. Hand laced to a 36 hole Rampage double-wall rim, 9T Chromoly driver w/ 3-pawl system. - Axle: 14mm chromoly (Heat-treated). - Driver: 1-pc chromoly RHD or LHD. - Driver bearings:6802 (x2), Verify bearing number on side of rubber seal. - Driver pawls: 3 Pawl. - Driver springs: Wraparound (x1). - Hardware: Steel(17mm wheel nuts). - Hub shell bearings:6902 (x2) Verify bearing number on side of rubber seal. - Spokes: 183mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished or Limited Edition colors. - Weight: 45.4oz.
Merritt BMX Justin Care Upload Stem
$74.99
Justin wanted a top load stem that could be run upside down and still raise your bars. Best of both worlds, clean looks and rise. Going with forged 6061 aluminum construction for both the body and cap produced a super strong stem with a design that wouldn’t be feasible with machining and also keeps the price low. 48mm reach and 21mm rise.
Tektro FX350 BMX U-BRAKE
$29.95
• A great value low-profile BMX brake that can be used front or rear and designed to accommodate modern tire sizes up to 2.5” • Melt forged aluminum coil-sprung arms with dual spring tension adjustment and 60mm pads • 18deg ‘Up angle’ cable anchor design for smooth rear wheel cable routing • 25-41 mm drop • Weight: 176 g per wheel • Colour: Black
ODI BMX Bar Plugs - Pair
$7.99
ODI nylon push-in handlebar end plugs Size: for 22.2mm (7/8") handlebars SOLD IN PAIRS
Stolen Thermalite Peg 10mm Axle Only
$16.99 $24.95 32% Off
- Thermalite plastic peg. - 3 Anti-rotation pin and CNC Alloy inner sleeve to increase strength.. - There’s four pin rotation spots so the pegs last forever even though they can wear down fast. - Need an axle on 3/8'' or 14mm of lenght to install it. - Length 100mm x 38mm Diam. - Weight: 83 gr. (14mm) - Sold by unit
RaceFace Ride Pedal
$54.95
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"
Stolen Barrel Peg 10mm Axle Only
$17.99 $24.95 28% Off
Stolen Barrel Cold Forged Chromoly Peg 10mm Cold Forged 107x34mm Red
Salt Junior V2
$44.99
Salt Pro Front loading stem with STC (Shark Tooth Clamping) inside the stem to help grip the bars, 48mm wide faceplate with central bore for reduced weight and unique side pocket detail. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Stem Type: Front Load
Kenda Comp III BMX K-50
$19.95
The Comp III in K50 Tread is a great tire for any BMX or kid's bike. - K50 tread pattern - Made from quality Kenda rubber
Stolen 20
$167.99
- Features: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Revolver double-wall rim (PVC rim strip included). - Axle: 3/8" chromoly (Heat-treated). - Hardware: Steel (17mm wheel bolts). - Hub shell bearings: 6000 (x2) Verify bearing number on side of rubber seal. - Spokes: 187mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, - Weight: 32.0oz.
Haro Zebra Seatpost Clamp (BMX)
$12.95
• Lightweight seatpost clamp • Super clean and low profile 28.6mm
Generic Brake Straddle Wire Doubled Ended
$5.95
Straddle wire for cantilever brakes Double ended anchor/barrel nipple
Generic Tire 20
$19.95
Affordable Repair Tires for Junior sized bikes
Generic Tire 16
$19.95
Affordable Repair Tires for Junior sized bikes
Generic One Piece Crank
$19.95 - $46.00
One-piece crankset - BB Style: Not Included - BB Included: No
Haro BASELINE GRIPS
$17.95
• 163mm long tacky soft Krayton rubber • Thin ribbed Baseline design • Baseline nylon bar ends included
ODI Flangeless Longneck
$19.95
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included
Haro BASELINE Handlebar 9.5
$79.95
100% full chromoly 50mm deep knurling for added clamping strength 9", and 9.5" rise 29" wide 12? back sweep 2? upsweep Available in ED black Includes blue, white and black baseline stickers
Stolen Hive BMX Grips
$15.99 $18.95 16% Off
- Features: Unique Hive pattern with Taper Grip technology to keep your hands on the bars. We also added our Super Stick rubber compound which is soft and long lasting. Vortex Rubber Bar Plugz included. - Length: 165mm - Diameter: 30mm (mounted) - Material: Super Stick Rubber - Colors: Black, Bright Blue, Caribbean Green, Gang Green, Glow in the Dark Green, Neon Orange, Neon Pink, Neon Yellow, Purple, Red, or White - Weight: 4.0oz. Per pair
Merritt BMX P1 Pedal
$39.99
The P1 Pedals have a low profile design that uses a special nylon/fiberglass blend that increases strength and extends pedal life. - 9/16"
KMC Z1 BMX Chain
$19.95 - $20.99
Z410 or S1 (New version) is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g
Generic KL-B06 M8x25 BMX Crank Bolt
$9.95
- 8T Crank axle screw. - M8x25.
KMC 410H 112 Link BMX/Single Speed Coloured Chain
$19.95
Z410 is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g
Generic Steel Ball Bearings - Bag of 144
$5.95 - $8.95
Bulk Bearings in various sizes, sold by the gross (144 units) Steel Ball Bearings
RaceFace Ride Pedal
$54.95
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"
Page 1 of 3 Next page