Cranksets

Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DZero DUB power meter is made for. Train harder, ride faster and unlock your ultimate potential.  - Specifically designed for use with XX SL Eagle T-Type Thread Mount chainrings (Sold separately) - AXS™™ enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED® and Force eTap AXS™™ cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48

When SRAM found ways to make their lightest and stiffest crank even lighter, they went for it. A new process further grams from the hollow carbon arms. Plus they're offering more crankarm lengths than ever before to ensure this crank works for you. - Hollow carbon crank arms are 29g lighter than previous generation - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings (Spiders and Chainrings sold separately) - DUB bottom bracket adds durability and simplicity (Sold separately) - Includes DUB Wide Spacer kit (2.5/3.0/4.5/5.5 mm) - 150mm Q-factor / 47.5mm chainline

The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5

RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - BB not included

- Solid forged crank arm - Square interface - Aluminum - Speed: 10/11 - Chainline: 44mm

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

The STYLO Carbon Fat Bike DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fat bike frame compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 190/197 Hubs

The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

The Descendant 6K DUB crankset delivers consistent performance every time out. Now featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 6000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

The new Gen 3 Stages Power meter is built onto a Shimano Dura-Ace R9100 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelorometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The Sword 1x crankset is designed for simplicity. With a single, chain-retaining ring mounted to the crankset's outer ring position, it pairs perfectly with the rest of the Sword 1x drivetrain to give you the stiffness, chain security, and ease of ownership you expect from a 1x drivetrain. It's designed to be as compatible as possible: the 24mm spindle is compatible with a ton of aftermarket bottom brackets, and it's easy to convert from a 1x to a 2x crank by simply installing microSHIFT Sword 2x chainrings. - Wide design optimized for 50mm chainline - 24mm spindle compatible with Shimano bottom brackets - 1x chain-retaining ring works well with clutch derailleur - Easy conversion from 1x to 2x

Born From The Mountain Whether your target is high speed or big air, an unwavering focus on dependability and style can never be overlooked. Blending the experience of countless DH podiums, big mountain competitions, and film sessions, the new Descendant DH crank brings clock-beating weight savings to freeride burliness—at a price that will leave money for the next adventure. Meet your gravity goals—Descendant. Features - Lightweight DH crankset - New graphics - World Cup proven design - Fully compatible with any 1x drivetrain - X-SYNC chainring Specifications: - Speeds: 10/11 - BB Compatibility: DUB BSA MTB83, DUB PF MTB104.5/107 - Chainring Size: 34 - Crank Arm Length: 165mm, 170mm - Chainline: 56.5mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank Arm Material: Aluminum

True value and performance are found in the FSA Tempo Adventure crankset. The cranks are built to serve the recreational rider well and enhance riding enjoyment. - Crank arm and spider feature monocoque construction - Die-cast aluminum crank arms are lightweight and durable - AL7075 stamped and CNC-machined outer chainring - Heat-treated chromoly inner chainring - Chromoly chainring bolts - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Crank Length: 170mm - Crank Intended Use: Road, Gravel - Pedal Spindle: 9/16" - Rings: 46/30 - Spindle Interface Type: Square Taper JIS - Drivetrain Speeds: 11 - Chainring BCD: 110 - BB Included: No

The Onyx cranks use an oversize super-hollow 24mm spindle, and a dependable 3-piece design with a super-strong invest cast spindle and pedal boss. These cranks are designed to take the strain, stress, and power of today’s most fierce riders. - Tubular heat-treated 4130 chromoly arms & axle - Strong, lightweight crank - RSD & LSD compatible - Investment cast pedal & spindle boss - Compatible with spline drive and bolt drive sprockets - Bore: 24 - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Not Included - BB Included: No

The Tibia cranks from Eclat offer the function and simplicity of a two-piece design, but stay true to the proven splined design of three-piece cranks. The Tibia cranks feature a slim arm design, constructed of 4130 chromoly arms and spindle. The Tibia cranks go together smoothly, stay secure and won’t let you down. - Tubular heat-treated 4130 chromoly arms & axle - Strong, lightweight crank - RSD & LSD compatible - 2 sprocket bolt holes on each side - Microdrive compatible - Bore: 22 - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 2-Piece - BB Included: No

Stages Gen 3 single-sided Power L meter is built onto a non-drive-side Shimano GRX RX-810 crank arm. It's compatible with all Shimano GRX Cranksets. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5% accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm 175mm Compatibility: - This Shimano GRX RX810 Stages Power meter is compatible with all Shimano GRX cranksets. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

True value and performance are found in the Tempo Adventure crankset. The cranks are built to serve the recreational rider well and enhance their riding enjoyment. - Die-cast alloy crank arms - Monocoque crank arm/spider - AL7075-stamped and CNC-machined outer chainring - Heat-treated chromoly inner chainring - Chromoly chainring bolts - Available for 9-11 speed system

The new Gen 3 single-sided Stages Power R meter is built on to a drive-side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, 2x phillips head screw to access battery compartment - Weight: Only adds 20g to base crankset - Battery Life: 175+ hours (via coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Drive-side power meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The Descendant 7K crankset delivers consistent performance every ride. Featuring SRAM's X-SYNC2 tooth profile chainring, the Descendant crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with SRAM chain's inner and outer links. SRAM DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability. - 56.5mm chainline (Super Boost+) - The Descendant 7K crankset is compatible with the SRAM Eagle drivetrain system - Featuring SRAM’s X-SYNC2 tooth profile - Optimized 7000 series forged aluminum arms - SRAM DUB technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible - Direct Mount ring - ISO 4210 compliant - 12-Speed - DUB bottom bracket sold separately

Our new enduro and downhill crank is precision machined from 7075 T6 aluminum in our Whistler machine shop. After more than two years of development and successful independent strength and fatigue testing at EFBE Pruftechnik in Germany, we’re excited to release these to everyone. Fits: - Enduro bikes with 73mm threaded and PF92 BBs - 133.5mm spindle length and 171.4mm Q-Factor - 148.5mm spindle length and 186.4mm Q-Factor - Compatible with SuperBoost bikes when paired with 0mm offset chainring Specifications: - Three-piece design - 30mm crank spindle diameter - Aluminum preloader - Machined from 7075 T6 aluminum - RF Cinch chainring mount ***** CHAINRING AND BB ARE NOT INCLUDED *****

Our new enduro and downhill crank is precision machined from 7075 T6 aluminum in our Whistler machine shop. After more than two years of development and successful independent strength and fatigue testing at EFBE Pruftechnik in Germany, we’re excited to release these to everyone. Fits: - 133.5mm spindle length and 171.4mm Q-Factor - Downhill bikes with 83mm threaded BBs and PF107 BBs - 148.5mm spindle length and 186.4mm Q-Factor - Compatible with SuperBoost bikes when paired with 0mm offset chainring Specifications: - Three-piece design - 30mm crank spindle diameter - Aluminum preloader - Available in four lengths: 155mm, 160mm, 165mm, 170mm - Machined from 7075 T6 aluminum - Cinch chainring mount Weight: 630g - 155mm w/ 73mm spindle 654g - 160mm w/ 73mm spindle 660g - 165mm w/ 73mm spindle 670g - 170mm w/ 73mm spindle

Our cranksets are precision machined from 7075 T6 aluminum in our Whistler machine shop. After more than two years of development and successful independent strength and fatigue testing at EFBE Pruftechnik in Germany, we’re excited to release these to everyone. Fits: - Rocky Mountain Powerplay Trail and Enduro E-bikes - 149.5mm spindle length and 187.4mm Q-Factor - You will need to use your existing Powerplay spider clutch - NOT COMPATIBLE with RMB E-Fat Bikes Specifications: - Three-piece design - 30mm crank spindle diameter - Aluminum preloader - Machined from 7075 T6 aluminum - RF Cinch chainring mount - Weight: 692g - 165mm ***** CHAINRING AND BB ARE NOT INCLUDED *****

Our new enduro and downhill crank is precision machined from 7075 T6 aluminum in our Whistler machine shop. After more than two years of development and successful independent strength and fatigue testing at EFBE Pruftechnik in Germany, we’re excited to release these to everyone. Fits: - Enduro bikes with 73mm / PF92 BBs - 73mm spindle length is 138.5mm - Q-Factor: 176.4mm - 55mm chainline with 3mm offset chainring - 58mm chainline with 0mm offset chainring Specifications: - Three-piece design - 30mm crank spindle diameter - Aluminum preloader - Machined from 7075 T6 aluminum - RF Cinch chainring mount ***** CHAINRING AND BB ARE NOT INCLUDED *****