Cranksets

The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13

The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686

The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - eeWings Mountain 165mm, 170mm or 175mm - 30mm Spindle - 10 year Warranty

Crank Insurance compatible with HollowGram cranks. ? Protects HollowGram crank arm from rock strikes ? Reflective strip keeps riders visible

The Tibia cranks from Eclat offer the function and simplicity of a two-piece design, but stay true to the proven splined design of three-piece cranks. The Tibia cranks feature a slim arm design, constructed of 4130 chromoly arms and spindle. The Tibia cranks go together smoothly, stay secure and won’t let you down. - Tubular heat-treated 4130 chromoly arms & axle - Strong, lightweight crank - RSD & LSD compatible - 2 sprocket bolt holes on each side - Microdrive compatible - Bore: 22 - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 2-Piece - BB Included: No

The Spire Crank features a proven 2 1/2 piece system combined with a super-tough, box-section arm design that will remain stiff and dent resistant. A strong and reliable crank built to shred. - RSD & LSD compatible - Smooth and rounded ankle-friendly spindle boss - Bore: 22 - Spindle Material: Steel - Weight: 31.8oz - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 2-Piece - BB Included: No

The Maverick cranks offer strength and good looks in an ankle-friendly design. - Cold forged 7075-T6 alloy - One piece forged alloy crank arm for ultimate strength - RSD & LSD compatible - Heat treated chromoly inserts at pedal and spindle bosses - Compatible with spline and bolt drive sprockets - Hollowed design for reduced weight - Bore: 22 - Spindle Material: Steel - Weight: 34.6oz - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Aluminum - Crankset Style: 3-Piece - BB Included: No

The Onyx cranks use an oversize super-hollow 24mm spindle, and a dependable 3-piece design with a super-strong invest cast spindle and pedal boss. These cranks are designed to take the strain, stress, and power of today’s most fierce riders. - Tubular heat-treated 4130 chromoly arms & axle - Strong, lightweight crank - RSD & LSD compatible - Investment cast pedal & spindle boss - Compatible with spline drive and bolt drive sprockets - Bore: 24 - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Not Included - BB Included: No

For square Taper BB M8 Vendor#: ML-019 Pair

Replacement crank bolt for BB30 cranksets QR-16 with Self Extracting Cap 30mm Spindle / M30 Cap Sold by the unit

- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles

- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options

- Asymmetric Bolt Spacing (ABS) technology with five asymmetric arms providing ultra lightweight direct power transfer - Optimized design distributes load on the crankset - BB386 Evo standard based on the PF30 standard but is now wider at 86mm - The crankset can be installed on almost every frame using a BB386 Evo bottom bracket

Cotter Pin for old-style cranks. Sold individually

One-piece crankset - BB Style: Not Included - BB Included: No

- Made of alloy - Cotterless - 9/16 pedal For compatibility, if you hold the original crankarm lenth upwards and look at the square hole for the bottom bracket spindle you should see if you need square or diamond.

• 100% forged tapered chromoly pinch bolt arms • 8 Tooth, 19mm spline chromoly spindle • Unique to Baseline tapered arm design from square to round for a clean ankle bite friendly design • Laser etched Baseline logo • Black Bottom Bracket not included

Assorted width bottom bracket spindle spacers for fine-tuning crank arm offset. Product Specifications - Compatibility: 19mm or 22mm Spindles - Includes: 2 x 0.6mm, 2 x 1.5mm, 2 x 3mm - Weight: 0.6 oz

The PRO Crank Protector is rubberised boot designed to protect crank arms. Designed to protect crank arms from scratches and knocks Optimised for SHIMANO cranks Compatible with SHIMANO E8050, M8050 and M8000 eBike cranks

- 9 speeds - Triple crank - Forged aluminium black - Chain line 50mm - For Square axle - Cartridge non-included - Chainguard included - 26/36/48T

- Quarq D1 crank arm assembly - 8 bolt interface for use DZero DUB and DFour DUB power spiders

Race Face CINCH Spindle

RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately

The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately

The RIDE crank arm set offers CINCH versatility, adaptable chainring options, and the 24mm EXI interface system for easier installation and removal. This set is a budget-friendly option with signature RaceFace styling, performance and craftsmanship. - Offers CINCH system compatibility - 24mm EXI interface for easier crank installation - Forged from 6066 aluminum with aggressive styling for a high strength to weight ratio - Compatible with CINCH direct mount alloy or steel rings - Direct mount chainline: 78.5mm / 85mm (Flipped Ring) - 2X Cinch spider chainline: 77mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 190/197 Hubs - Crank Intended Use: Fat Bike - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No

The RaceFace Aeffect R crankset offers enduro-rated strength in a lightweight XC-style package, making it a solid and dependable crankset choice. - Its forged 7050 AL construction optimizes stiffness without added weight - The Aeffect R features the versatile CINCH system for plenty of interchangeable spider options - Can run alloy or steel CINCH direct mount chainrings - Boost-compatible 24mm EXI interface spindle - Direct mount chainline: 51mm / 57.5mm (Flipped Ring) - 2X Cinch spider chainline: 49.5mm - Boost 2X Cinch spider chainline: 52.5mm - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No - Chainring Included: No

The People's Champ Years of unrivaled strength and durability have earned the Turbine a place in the crankset hall of fame. Compatibility Ability CINCH System is designed to work with your next bike, the bike after that, and the bike after that. Not So Heavy Metal This crankset is forged to maximize strength then machined to shave away every unnecessary ounce of weight. Work Hard, Play Hard The sickest aluminum crank on the trails, thirty years running. The Turbine delivers an incredibly stiff and responsive ride and tons of versatility thanks to proven Race Face tech. Go ahead, get rowdy–Turbine won't let you down. Specs - Chainline 52mm - 136 Spindle - Includes Pedal Washers (Chain Rings & Bottom Brackets sold separately) - Axle Material 7050 Aluminum - Crank Arm Material 7050 Aluminum - Material 7050 Aluminum - Spindle Diameter (MM) 30 - Weight 622g - Weight Conditions 170mm Arms, 32T Alloy Chain Ring