BMX

• Lightweight seatpost clamp • Super clean and low profile 28.6mm

ODI nylon push-in handlebar end plugs Size: for 22.2mm (7/8") handlebars SOLD IN PAIRS

The P1 Pedals have a low profile design that uses a special nylon/fiberglass blend that increases strength and extends pedal life. - 9/16"

Bottom bracket kit for one piece crank

Straddle wire for cantilever brakes Double ended anchor/barrel nipple

- 8T Crank axle screw. - M8x25.

Wider, thinner and more durable than ever before, the Atlas pedal is a lean, mean, grippy alloy machine. Bigger platform, longer and adjustable pins, easy serviceability, 9 colours to choose from and a Lifetime Warranty – the Atlas pedal once again shows its best-in-class performance pedigree.

Z410 or S1 (New version) is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g

Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends

Affordable Repair Tires for Junior sized bikes

FRONT: - Features: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Rampage double-wall rim (PVC rim strip included). - Axle: 3/8" chromoly (Heat-treated). - Hardware: Steel (17mm wheel nuts). - Hub shell bearings: 6000 (x2) Verify bearing number on side of rubber seal. - Spokes: 187mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished, or Limited Edition colors. - Weight: 32.5oz. REAR: - Features: Four bearing sealed cassette hub w/ 14mm Chromoly axle. Hand laced to a 36 hole Rampage double-wall rim, 9T Chromoly driver w/ 3-pawl system. - Axle: 14mm chromoly (Heat-treated). - Driver: 1-pc chromoly RHD or LHD. - Driver bearings:6802 (x2), Verify bearing number on side of rubber seal. - Driver pawls: 3 Pawl. - Driver springs: Wraparound (x1). - Hardware: Steel(17mm wheel nuts). - Hub shell bearings:6902 (x2) Verify bearing number on side of rubber seal. - Spokes: 183mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished or Limited Edition colors. - Weight: 45.4oz.

• A great value low-profile BMX brake that can be used front or rear and designed to accommodate modern tire sizes up to 2.5” • Melt forged aluminum coil-sprung arms with dual spring tension adjustment and 60mm pads • 18deg ‘Up angle’ cable anchor design for smooth rear wheel cable routing • 25-41 mm drop • Weight: 176 g per wheel • Colour: Black

The Comp III in K50 Tread is a great tire for any BMX or kid's bike. - K50 tread pattern - Made from quality Kenda rubber

One-piece crankset - BB Style: Not Included - BB Included: No

Affordable Repair Tires for Junior sized bikes

- Regular chain link - 1/2” x 1/8” single speed

Rep your country and sport fun colors on your fixie with KMC's Z510H Chain. - 1/2" x 1/8" - 112 Links - Single-speed - 1/8" Track Bikes & BMX Racing, Freestyle - Heavy Duty

WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.

• 163mm long tacky soft Krayton rubber • Thin ribbed Baseline design • Baseline nylon bar ends included

Z410 is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g

- 1/2" x 1/8" - Single-speed - BMX Racing, Freestyle

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included

Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

No frills, affordable, durable, plain and simple. The Mission Strafe pegs are a perfect 4.5" long, and include an adapter for use with 14mm or 3/8" axles. Go get your grind on! - Sold individually - Material: Steel - Weight: 11.0-ounce

- Thin platform, concave aluminum body with bottom loading pins. - Shorter spindle design shaves weight. - Thin concave platform - Reduced spindle length saves weight - Hex-head threaded pin design offers more bite for added security - Hidden / Grease access port for extended life - Platform size: 101x100cm - Cartridge bearings and DU bushings - 20 SHCS hex traction pins per pedal

Affordable Repair Tires for Junior sized bikes

Affordable Repair Tires for Junior sized bikes

S&M Sprocket spacer kit. For 6mm thick sprockets. Features the following- 1) 24mm to 19mm adapter. 1) 24mm to 22mm adapter.

WeThePeople's Helix Rear Driver Guard protects the driver on your beautiful Helix hub during grinds. Made from 7075 aluminum with a tough inner steel core, this guard perfectly fits the drive-side of your Helix rear hub. Grind with confidence!

- Features: Straight gauge seamless 4130 Chromoly Steel. - Sizes: 8.60", 9.0" or 9.50". - Sweep: 10° back, 2° up. - Colors: Matte Black, Chrome & Limited Edition Colors. - Weight: 33.6oz.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

- 8T - 19mm Cr-Mo Spindle - 2xMid-Type Sealed Bearing

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

*** 2,000 BC REWARDS BONUS POINTS! *** In-Store Inventory Only. - - - - - - - - - - - - - - Low-profile, lightweight, wide aluminum body with double-concave platform. - Platform size: 101x114cm - 4 Full sealed cartridge bearings per pedal - Super thin double concave wide platform - Hex-head threaded pin design offers more bite for added security - Fore and aft angled bottom-loading pins - Hidden pin / Grease access port - 20 SHCS hex traction pins per pedal

• 100% forged tapered chromoly pinch bolt arms • 8 Tooth, 19mm spline chromoly spindle • Unique to Baseline tapered arm design from square to round for a clean ankle bite friendly design • Laser etched Baseline logo • Black Bottom Bracket not included

THE CORE BRAKE CABLE It’s important for us to keep on top of our rider/customer feedback and one thing that always bugged us was the constant kinking in cables. The Core linear brake cable comes with a poly-slip coated inner wire and a reinforced spiral shell to stop this from happening. With éclat’s Core linear brake cable you carry on spinning and keep the same brake control. Material cable: 1.5mm slic, stainless, pre-stretched, poly-slip coated inner wire / housing: 5mm compressionless, linear strands Length 130cm (cablehousing) Colors black, white, blue, red, gold Features reinforcing spiral alloy shell / 2pcs ferrule (loose) and 2pcs end nipple are included / ball and barrel cable nipple Weight 78g (2.75oz : 0.17lbs)

- Features: Multi-butted 4130 Chromoly, 19mm cross bar, P2 post-production heat treated for increased strength. - Sizes: 9.50" (29.5" wide), 9.75" (30.00" wide), 10.0" (30.00" wide). - Sweep: 10° back, 3° up. - Colors: Black. - Weight: 32.75oz. / 928g. (9.50”).

The Option tire takes a new look at what makes a good street tire, and goes way beyond just making a tread pattern that looks good. Featuring our Slidewall Technology which is our own ultra-hard low friction compound that helps reduce drag on grinds and increase the life of the tire sidewalls plus a ton of other features. The center section of the tire is smooth, so it is nice and fast, but the tread is actually thick for this section. The thicker tread has the benefit of increased shock absorption and then abruptly tapers down to a thinner thickness. By having the tapered tread connect to the thick center section, it offers support so there is no squirm and the tire is stable and at the same time reduces the tire weight because there is no benefit to the thicker tread on those sections of the tire. 110 PSI max tire pressure 120 Threads per inch Weight: 29 oz.

- 1/2" x 1/8" - Single-speed - BMX Racing, Freestyle - Half Link Design

Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g

- Features: Our American BB cups allow you to use any sealed MID BB (19, 22 or 24mm) in any American bottom bracket frame. If you have a frame with an American BB shell, Buy a MID BB like our Savage or Revolver, press the bearings into the cups and the cups into your frame.If you are upgrading from a loose ball system you will also need this 8-Spline spindle. - Material: 6061 T-6 Aluminum Alloy. - Bearing size: MID. - BB shell size: American. - Color: Anodized Black. - Weight: 2.0 oz. (56.7g.).

The Best Of Both Metals The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up. Surefooted As A Mule You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need. Your True Colors Shining Through Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you. Get Up Stand Up Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):16.9 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 101 x 100 - Weight: 375g

- Features: New design featuring recessed sides and bottom section to reduce weight. Forged from 6061 Aluminum w/ Cold Forged face plate for strength. Recessed top face for our new Compression fork preload bolt. - Length: 52mm. - Bolts: 6mm Hardened hollow Chromoly. - Colors: Matte ED Black, Dark Blue, Green, Red, Polished, or Painted White. - Weight: 9.6 oz. SLAB TL STEM (BMX) - Features: New design with minimal machining keep cost low and strength high, we added our small brass badge for a unique style Cold-forged body and face plate from 6061 Aluminum for high strength. Recessed top face for our clean fork preload bolt. - Reach: 50mm. - Stack height: 30mm. - Rise: 31mm (Upright) / 2mm Drop (Invert). - Clamp bolts: 8x1.25mm Hardened Chromoly (x4). - Pinch bolts: 8x1.25mm Hardened Chromoly (x2). - Steerer Diameter: 1-1/8''. - Bar bore: 22.2mm. - Colors: Anodized Black, or Polished. - Weight: 11.2oz. (317g.). TLC (TOP LOAD CLUTCH) - Top load version of the Clutch stem. - Features: CNC machined from Billet 6061 T-6 Aluminum. Designed using precision material removal to reduce weight while maintaining maximum strength. - Length: 50mm. - Bolts: 6mm Hardened hollow Chromoly. - weight: 269g.

- 14mm hub - 9T Driver - Aluminum Silver Rim

- Features: Unique design made of Krayton rubber, fit on regular, 9, 11 & 13 butt bars. - Material: Krayton Rubber. - Colors: Black, Dark Blue, Gang Green, Glow in the Dark Green, Neon Orange, Neon Pink, Neon Yellow, Purple, Red, White, Bright Blue and Caribbean Green. - Weight: 0.6oz. per pair.

Material: high-quality soft rubber compound Colors: black, clear black Features: comes with all required hardware (bolts, etc.), midlength pad size Weight: 54g (0.11lb / 1.9oz)

- Features: The Whip Linear Cable features a heavy duty stainless steel, multi-strand, pre-stretched inner cable cased in a Teflon lined linear housing that keep your brakes smooth and prevents kinking. Aluminum ferrules prevent the housing from pulling through the ends and have rubber seals to keep grit out of your housing. - Included: Spare Alloy ferrule & cable end, for length adjustment. - Housing Length: 50". - Wire Length: 56". - Wire colors: Black or FastTimes Checkered. - Weight: 2.90oz.

- 20". - Rim: Double Wall Large Black. - Hub: black - Spokes: Pillar stainless black. - Axle 14mm or 3/8. - Holes: 36.

The Kink Universal Driver guard is designed to fit most modern freecoaster and cassette hubs using either an 8T or 9T driver. The guard is made from heat-treated chromoly steel, giving it a ton of strength and long lifespan. The slim chromoly design means it can slide between your existing hub hardware and dropout, which allows for easy installation with only a wrench or socket to loosen and tighten axle nuts

Protect your beautiful Helix hub on grinds with WeThePeople's Helix Rear Hub Guard. Made from 7075 aluminum with a tough inner steel core, this guard perfectly fits the non-drive side of your Helix rear hub. Grind with confidence!

Material: premium quality 7075-T6 alloy topbolt plus washer Size: M24 x 1.5mm pitch (fits to 2011/ 2012/ late 2013 and 2014 forks) Weight: 33g (1.12oz : 0.07lbs)

Affordable Repair Tires for Junior sized bikes

SLOT MACHINE PEGS Simple but effective. The éclat Slot Machine peg may look simple but then appearances can be deceiving. This peg has a butted 4140 crmo construction providing immense strength whilst the machined slots and holes combined with liquid heat-treatment keep it super light. SOLD INDIVIDUALLY. Specifications Material 4140 crmo liquid heat-treated Size as 3/8" or 14mm axle hole version available Length 4" Outer Diameter 35mm Colours raw Features smaller diameter / double-butted dent prevention design / light Weight design 5 bore holes between 5 slick cut-outs / sold as single Weight 179g (6.31oz : 0.39lbs) (per piece)

SPANISH/MID BB SET A simple, stylish CNC’d Spanish or Mid BB available in 22mm. The perfect way to compliment your ride with etched éclat detailing and lightweight aluminium spacers.

Material: 100% high-quality Kraton Hardness: durameter 25 Size: 162mm x 29.5mm Colors: black, purple, cyan/black marble, neon yellow/black marble Features: incl. saltplus nylon barends, longer design for today's larger bars, with flanges or without. Weight: 86g (0.18lb / 3.03oz)

The Federal hubguard is a forged (stronger than CNC machining) alloy guard designed with a smaller surface area touching the dropout to allow the rear wheel to be slammed further into the dropout. This guard will fit almost all rear hubs on the market and comes with a laser etched logo.