Wheels

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

FRONT: - Features: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Rampage double-wall rim (PVC rim strip included). - Axle: 3/8" chromoly (Heat-treated). - Hardware: Steel (17mm wheel nuts). - Hub shell bearings: 6000 (x2) Verify bearing number on side of rubber seal. - Spokes: 187mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished, or Limited Edition colors. - Weight: 32.5oz. REAR: - Features: Four bearing sealed cassette hub w/ 14mm Chromoly axle. Hand laced to a 36 hole Rampage double-wall rim, 9T Chromoly driver w/ 3-pawl system. - Axle: 14mm chromoly (Heat-treated). - Driver: 1-pc chromoly RHD or LHD. - Driver bearings:6802 (x2), Verify bearing number on side of rubber seal. - Driver pawls: 3 Pawl. - Driver springs: Wraparound (x1). - Hardware: Steel(17mm wheel nuts). - Hub shell bearings:6902 (x2) Verify bearing number on side of rubber seal. - Spokes: 183mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished or Limited Edition colors. - Weight: 45.4oz.

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheelset.

Fat bikes have opened the eyes to many riders regarding where and how bicycles can be ridden. The XM 1501 SPLINE 35 carries the genes of fat in a lightweight trail package. It is the perfect fit for 2.6-inch tires. Fit to a modern trail bike, it opens up unknown possibilities: That slippery off-camber root section all of a sudden is looking a lot less intimidating. With our industry-leading material and manufacturing know-how DT made sure that this wheel, despite its built-in rowdiness, comes to you in a lightweight and durable package, ready for many all-mountain adventures.

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore-is purpose—built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

There are no compromises on race day, and Profile Design knew that when they designed their 78/TwentyFour carbon tubular wheels. The 78mm-deep and 24.5mm-wide rim and super stiff carbon layup provide uncompromising go-fast performance. And, the aero shape of the rim slips easily through the breeze, increasing your efficiency and speed. Match these rims up with your favorite tubular tires (sold separately) and experience the high-traction cornering and supple road feel you need to ride to believe. The hubs feature sealed bearings for high-mileage durability and the freehub body is Shimano/SRAM 9, 10, and 11-speed compatible so you can use the drivetrain of your choice.

There are no compromises on race day, and Profile Design knew that when they designed their 58/TwentyFour tubular wheels. The 58mm-deep rim, 24.5mm rim width, and super stiff carbin layup provide uncompromising go-fast performance. And, the aero shape of the rim slips easily through the breeze, increasing your efficiency and speed. Match these rims up with your favorite tubular tires (sold separately) and experience a ride that clinchers just can't offer, with high-traction cornering and a supple road feel you need to ride to believe. The hubs feature sealed bearings for high-mileage durability and the freehub body is Shimano/SRAM 9, 10, and 11-speed compatible so you can use the drivetrain of your choice.

The 1/Fifty is a wide, deep profile, full carbon aero rim that successfully blends crosswind stability, stiffness and handling while delivering superior heat dissipation and braking performance by utilizing the same ultra high Tg resin and brake pads as the TwentyFour series wheels. The semi-automated carbon lay-up, rim construction and raw materials proven through the TwentyFour series wheels are exemplified in the 1/Fifty rims. By utilizing components optimized for more efficient production, we are able to deliver a performance wheelset at an aggressive price. Specifications - CFD and wind tunnel developed proprietary carbon fiber 50mm low profile clincher rim. - High TG resin. - Proprietary precision machined alloy hubs. - Sealed cartridge bearings. - Hand-built assembly. - 11/10S Shimano compatible. - Relief along rim bed for center base tape. Each 1/Fifty Wheel Includes - 10spd cassette space. - Profile Design rim tape. - Profile Design quick-release skewers. - Profile Design Carbon-Specific P220 TwentyFour Series brake pads. Front Wheel - Weight: 730g - Size: 700c - Hub: 6061-T6 Alloy - Bearing Size: 6900 - Compatibility: QR - Rim Depth: 50mm - Rim Width (Outside): 24.5mm - Rim Width (Inside): 17mm - Spokes: Sapim Race - Spoke Shape: Straight Pull - Spoke Count: 20 - Spoke Pattern: Radial - Spoke Length: 259mm - Nipples: 7075 Alloy Polyax Double Square - External Nipples: Yes - Max Tire Pressure: 125psi / 8.27 bar - Tire Width: 25-28c Rear Wheel - Weight: 884g - Size: 700c - Hub: 6061-T6 Alloy - Bearing Size: 6802 - Compatibility: Shimano/SRAM: 9/10sp, 11sp w/included spacer - Rim Depth: 50mm - Rim Width (Outside): 24.5mm - Rim Width (Inside): 17mm - Spokes: Sapim Race - Spoke Shape: Straight Pull - Spoke Count: 24 - Spoke Pattern Non-Drive: Radial - Spoke Pattern Drive: 2 cross - Spoke Length Non Drive: 263mm - Spoke Length Drive: 268mm - Nipples: 7075 Alloy Polyax Double Square - External Nipples: Yes - 11-Speed Compatible Hub: Yes - Max Tire Pressure: 125psi / 8.27 bar - Tire Width: 25-28c Wheelset - Set Weight: 1614g - Max Recommended Rider Weight (lbs): 220lbs

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT200 (Black), Shimano logo, M9x100mm - Rear hub: Shimano FH-MT200-B (Black), Shimano logo, M9x141mm BOOST141 - HG Freehub compatible with 8 - 10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Quick Release binders included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Shimano FH-MT400 (Black), Shimano logo, 12mm E-THRU, O.L.D. 142mm - Rear hub (2): Shimano FH-MT4050 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Rear Quick Release binder included (FH-MT4050) - E-THRU Axles not included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

Reasonably priced repair or replacement wheel

- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing - More than 300 grams lighter that previous model - Optimized tire bed for easy tire installation - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction - Center locking rotor interface. Lockring is included with the wheels - Zipp graphics applied using Zipp's ImPress direct-print technology - Minimum 25mm tire width - Lifetime Warranty

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals. - Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width - Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs

Zipp's 303 Firecrest Tubular rim-brake wheelset offers key innovations for performance-minded cyclists. This is the game-changing wheelset designed to conquer Roubaix and Flanders. Retaining their versatile 45mm rim depth, 303 Firecrest Tubular rims feature construction designs for improved impact protection. And, when it comes to pure speed, the 303 Firecrest Tubular packs a serious punch. It's lightweight and features ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level wheels. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance. Zipp's ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. Lastly, at the center of the 303 Firecrest Tubular is a new versatile and durable hubset, the German-engineered ZR1. - ShowStopper textured brake track delivers the best modulation and shortest stopping distances in wet and dry conditions - New ZR1 hubset is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Go-anywhere 45mm rim depth tubular pro-proven in the Spring Classics - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps and quick release skewers

Zipp's 303 Firecrest Tubular rim-brake wheelset offers key innovations for performance-minded cyclists. This is the game-changing wheelset designed to conquer Roubaix and Flanders. Retaining their versatile 45mm rim depth, 303 Firecrest Tubular rims feature construction designs for improved impact protection. And, when it comes to pure speed, the 303 Firecrest Tubular packs a serious punch. It's lightweight and features ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level wheels. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance. Zipp's ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. Lastly, at the center of the 303 Firecrest Tubular is a new versatile and durable hubset, the German-engineered ZR1. - ShowStopper textured brake track delivers the best modulation and shortest stopping distances in wet and dry conditions - New ZR1 hubset is engineered in Germany with better seal design for improved durability - Go-anywhere 45mm rim depth tubular pro-proven in the Spring Classics - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps and quick release skewers

Zipp's 302 Tubeless rim-brake wheels deliver dependable speed for aspiring and experienced cyclists alike. These wheels provide great value and performance and are now tubeless, allowing you to run lower tire pressure for greater cornering grip and reduced rolling resistance without the risk of pinch flats. Its 45mm deep, Indianapolis-made carbon rim is optimized for low aerodynamic drag and precise handling in all riding conditions. The 302's smooth carbon rim is laced to Zipp's 76 hub using Belgian CX-Sprint spokes and brass spoke nipples to build a wheel that is fast and reliable—tough enough to thrive in the big Gran Fondo or the road less traveled, yet light enough to tackle the steepest grades. The 302 is equally suited to training rides or duking it out at your local race series. - Tubeless design provides secure performance when riding at lower tire pressures - New Zipp graphics and cosmetic identity that scream speed - Dependable 76/176 hubs with Sapim CX Sprint J-bend spokes - Ships with QR end caps and quick release skewers

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Reasonably priced repair or replacement wheel for a children's Bicycle

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

- Size: 29". - Rim: Black Anodized. - Hub: Black disc. - Spokes: Black Pillar Stainless. - 36H. - With eyelets. - Presta Valve.

High quality sealing Cup & Cone Bearing Sprocket and 10-speed Cassette Sprocket 11-speed freehub compatible with 11-speed Cassette Lower inertia while maintaining stiffness and rigidity for acceleration and speed To improve the driving rigidity for better acceleration feeling SPOKE FINISH Black WHEEL SIZE 700c RIM MATERIAL Aluminum FREEHUB BODY MATERIAL Steel AVERAGE WEIGHT F(982g),R(1177g) AXLE FIXING METHOD QR NUMBER OF SPOKES 28,28/28 SPEEDS 10*/11 RIM WIDTH 23 FRONT REAR PAIR Front,Pair NIPPLE FINISH Silver DISC MOUNT Center Lock Disc NIPPLE MATERIAL Brass FREE HUB SEAL TYPE -,Contact TIRE TYPE Clincher HUB SEAL TYPE Contact RIM HEIGHT 24 AXLE MATERIAL F-Steel,R-Steel RIM JOINT Sleeve RIM FINISH Anodized (Black Rim),Painted (White Rim),Anodized SPOKE MATERIAL Stainless Steel BRAKE TYPE Center Lock Disc O L D 10,100/135 RECOMMENDED TIRE SIZE 25-38c QR SKEWER LENGTH -,F-QR133MM,R-QR168/173MM

The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi). - Weight: Rear 865g (including 15g, tubeless rim tape and tubeless valve). - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs / 125kg