Electronics

Replacement GPS mount insert for the Direct X-Lock Mount System and the Alloy CNC Forward Mount.

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

Cadence Magnet for all CatEye computers that record cadence.

Wheel magnet for all CatEye cycle computers

Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.

Power Spoke magnet for all Sigma computers. Fits round and bladed spokes.

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

Kit containing all replaceable items for the Specialized power meter pod. - White silicone O-ring. - Two M3x5 stainless steel screws.

Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.

- Handlebar mount for CatEye wired computers - Compatible with Velo 7 and Velo 9

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails

Protective Silicone case for Edge 1040 and 1040 Solar

The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.

Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.

The Pace 15 computer packs an incredible number of functions into a sleek attractive package. The large back-lit display is a breeze to read in all conditions. Following the included directions makes setup a snap! The Pace 15 will count the number of calories you burn and even remind you to oil your chain! - Compatible with 14 to 29/700c wheels (1000mm to 2999mm outside circumference) - Includes wired speed sensor and computer mount with no-slip / anti-scratch backing pad, batteries and zip ties for installation - 90 cm long wiring harness makes installation possible on all sorts of bikes - Battery saver auto on / off function - Large backlit display - Computer dimensions: 40mm (W) x 60mm (L) x 10mm (D) - IP44 water-resistance rating. Pace 15 Functions: 1. Current speed display KM / MPH 2. 12/24 hour clock 3. Display function auto scroll 4. Stop watch 5. Trip distance 6. Total distance 7. Trip time 8. Average speed 9. Maximum speed 10. Calories consumption 11. Fat-Burn measurement 12. Temperature, also day max and min 13. Speed tendency 14. Maintenance reminder, user settable 15. Back light, configurable

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.

At the heart of the Bar Fly 1.0 is 1/8th turn technology and it's the centre point of our new mounting system. The 1/8th turn mechanism is a patent pending positive engagement system that enables cross compatibility with all Garmin Edge series cycling computers, and the Garmin Forerunner 910 XT and 310 XT watches. Thanks to Bar Fly 1.1, transitioning between multiple computers from dirt to pavement and run to bike has never been easier. Stay centered on all your bikes with Bar Fly 1.0. Compatible with all All Edge series cycling computers, including the 200/ 500 and 510/800/810 and the Forerunner 910 XT and 310 XT watches (requires the use of the Garmin Forerunner Quick Release Kit sold separately). With Bar Fly products there is always zero risk of over-tightening. Carbon handlebar safe. Single bolt, full wrap clamp is easy to install without removing the handlebar tape. Positive engagement with a click. Full wrap clamp will never fall off. Garmin computers are made of plastic and so is the Bar Fly. Delrin is the highest quality plastic and is the most appropriate material for this key interface. 19 grams. Made in the USA. Key Features: Bar Fly 1.0 Computer Mount 1/8th turn mechanism Cross compatible with all Garmin Edge, Compatible with Garmin Edge Series (200, 500, 800) Carbon handlebar safe Single bolt, full wrap clamp

The Velo 7 is CatEye’s entry level wired 7 function bike computer made simple with pre-programmed tire sizes.

Specialized Turbo Conect Display mount. Road Mount: Left- and right-side compatible. Road design situates a CPU in front of stem. MTB Mount: Left- and right-side compatible. Mountain bike design situates a CPU above stem.

Replacement charging clips and Y-shaped cable for the POWRLINK ZERO Power Pedal System In the box - Y-shaped charging cable - Charging clips (x2)"

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

CatEye's Velo 9 features a large easy-to-read display and one large button for changing modes, making this sleek, wired computer easy to use. On top of all the standard functions the Velo 9 also has a calorie counter to help you track your energy expenditure and a carbon offset calculator to monitor your good will towards the environment. You'll also love CatEye's tool-free Flex-Tight mount for easy installation and removal.

Securely holds your Turbo Connect Display/Speedzone 2 computer. - Specialized Turbo Connect Display mount. - Left- and right-side compatible. - Mountain bike design situates a CPU above stem. - Fits 35mm handlebars.

Securely holds your Turbo Connect Display/Speedzone 2 computer. - Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount. - Left- and right-side compatible. - MTB-style above-the-stem mount.

Securely holds your Turbo Connect Display/Speedzone 2 computer. - Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount. - Left- and right-side compatible. - Road-style above-the-stem mount.

Lightweight, rugged CNC machined aluminum aero bicycle mount. Simple, reliable single-pivot 31.8 bar clamp. Secondary adjustable swivel provides perfect device positioning. Compatible with Lezyne X-Lock mount GPS cycling computers. Extra-secure and replaceable Composite Matrix X-Lock insert. Refined aluminum design with classic Lezyne styling. All stainless steel hardware. Perfect for the cyclist looking to streamline his or her cockpit with a beautifully stealth anodized black GPS computer mount. - Weight: 37g

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The CatEye Enduro features a large, easy to read screen combined with a heavy-duty wiring kit for extra durability. - Heavy-duty wired computer - Auto start/stop - Pace arrow - Simple tire size - Programmable odometer - Zip tie mount compatible with FlexTight universal bracket

- Dual-band Bluetooth and ANT+, magnetless sensor with integrated accelerometer - Quick pairing with CatEye Cycling app (Bluetooth) - Waterproof IPX7 (based on JIS C0920) - Works with Padrone Digital, Padrone Smart+, Padrone Smart*, and Strada Smart* *For Padrone Smart and Strada Smart, works in Mirror Mode only