Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

WeThePeople Legacy Crank
$264.95
The Legacy crank uses a super tough 2-1/2 piece construction, a larger 22mm spindle and square shaped chromoly arms to maximize strength. WeThePeople toughened up areas like the pedal boss with its own investment cast gusset, to beef things up. - Designed for use with a 22mm Mid Bottom Bracket (not included) - Full seamless Japanese 4130 chromoly tubing, liquid post heat-treated - Grind-friendly, square-shape arms - RSD/LSD compatible
WeThePeople Raptor Grips
$19.95
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
Tektro FX350 BMX U-BRAKE
$29.95
• A great value low-profile BMX brake that can be used front or rear and designed to accommodate modern tire sizes up to 2.5” • Melt forged aluminum coil-sprung arms with dual spring tension adjustment and 60mm pads • 18deg ‘Up angle’ cable anchor design for smooth rear wheel cable routing • 25-41 mm drop • Weight: 176 g per wheel • Colour: Black
Stolen 20
$109.95 - $145.95
FRONT: - Features: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Rampage double-wall rim (PVC rim strip included). - Axle: 3/8" chromoly (Heat-treated). - Hardware: Steel (17mm wheel nuts). - Hub shell bearings: 6000 (x2) Verify bearing number on side of rubber seal. - Spokes: 187mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished, or Limited Edition colors. - Weight: 32.5oz. REAR: - Features: Four bearing sealed cassette hub w/ 14mm Chromoly axle. Hand laced to a 36 hole Rampage double-wall rim, 9T Chromoly driver w/ 3-pawl system. - Axle: 14mm chromoly (Heat-treated). - Driver: 1-pc chromoly RHD or LHD. - Driver bearings:6802 (x2), Verify bearing number on side of rubber seal. - Driver pawls: 3 Pawl. - Driver springs: Wraparound (x1). - Hardware: Steel(17mm wheel nuts). - Hub shell bearings:6902 (x2) Verify bearing number on side of rubber seal. - Spokes: 183mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, Blue Red, Polished or Limited Edition colors. - Weight: 45.4oz.
Stolen 20
$184.95
- Features: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Revolver double-wall rim (PVC rim strip included). - Axle: 3/8" chromoly (Heat-treated). - Hardware: Steel (17mm wheel bolts). - Hub shell bearings: 6000 (x2) Verify bearing number on side of rubber seal. - Spokes: 187mm (3X) Black w/ Black Brass nipples. - Drilling: 36H only. - Colors: Anodized Black, - Weight: 32.0oz.
Stolen BMX Stem
$59.95 - $79.95
- Features: New design featuring recessed sides and bottom section to reduce weight. Forged from 6061 Aluminum w/ Cold Forged face plate for strength. Recessed top face for our new Compression fork preload bolt. - Length: 52mm. - Bolts: 6mm Hardened hollow Chromoly. - Colors: Matte ED Black, Dark Blue, Green, Red, Polished, or Painted White. - Weight: 9.6 oz. SLAB TL STEM (BMX) - Features: New design with minimal machining keep cost low and strength high, we added our small brass badge for a unique style Cold-forged body and face plate from 6061 Aluminum for high strength. Recessed top face for our clean fork preload bolt. - Reach: 50mm. - Stack height: 30mm. - Rise: 31mm (Upright) / 2mm Drop (Invert). - Clamp bolts: 8x1.25mm Hardened Chromoly (x4). - Pinch bolts: 8x1.25mm Hardened Chromoly (x2). - Steerer Diameter: 1-1/8''. - Bar bore: 22.2mm. - Colors: Anodized Black, or Polished. - Weight: 11.2oz. (317g.). TLC (TOP LOAD CLUTCH) - Top load version of the Clutch stem. - Features: CNC machined from Billet 6061 T-6 Aluminum. Designed using precision material removal to reduce weight while maintaining maximum strength. - Length: 50mm. - Bolts: 6mm Hardened hollow Chromoly. - weight: 269g.
Stolen Fiction Atlas BMX Tire
$42.99 - $56.95 $54.95 - $56.95 Up to 22% Off
20" X 2.3" or 2.4" FICTION ATLAS (HP) - Directional tire with a low profile tread design, excellent high performance tire for street and park. - Inflated width: 2.4" (61mm). - Inflated diameter: 20.9" (531mm). - Max pressure: HP: 80-110PSI. - Colors: Red/Black tie dye. - Weight: 23.4oz.
Stolen Fiction Deviant Bars
$79.99 $93.95 15% Off
11x butted 4130 Chromoly, 19mm Vortex spiral fluted cross bar, P2 post-production heat treated. Sizes: 8.9" (28.5" wide) & 8.5" (28.5" wide) Sweep: 12° back, 1° up Colors: Matte Black, Matte Gang Green, Matte Blue, Matte Red, Matte Neon Orange, or Matte White
Stolen Fiction Troop Bars
$69.95
- Features: Straight gauge seamless 4130 Chromoly Steel. - Sizes: 8.60", 9.0" or 9.50". - Sweep: 10° back, 2° up. - Colors: Matte Black, Chrome & Limited Edition Colors. - Weight: 33.6oz.
Stolen Thermalite 9/16-inch Platform Pedals
$29.95
The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material. - Micro knurling with 24 pins for traction - Recessed end to prevent damage to bearing cover - Chromoly spindle with 6mm broach and 15mm wrench flats - Weight: 391g - Pedal Body Material: Composite/Plastic
Specialized Compound Street 20-inch
$29.95
Our Compound tire is the answer for any rider looking to launch an urban assault or perform at their peak level at the local skate park. That's because it provides awesome, fast rolling traction, whether you're riding over concrete or asphalt. - Casing: 30 TPI - Bead: Wire - Compound: 60a - 20 x 2.1", PSI 50-85, approximate weight 540g - 20 x 2.3", PSI 50-85, approximate weight 570g
Specialized Enduro Grip
$17.95
Our Enduro Grips are designed to outperform the rigors of all mountain and enduro riding. That's why they feature a thicker degree of padding and a non-slip texture for enhanced shock absorption and lasting comfort. Not stopping there, we amplified these characteristics via a dual-density compound. As we mentioned, the inner core is thicker than your average grip in order to deal with shock, while the outer part has a softer density to better absorb vibrations. And to put the "grip" into these grips, we also gave them a textured pattern for no-slip performance on the trail. Put it all together, and you're looking at grips that are going to leave your hands comfortable and fresh over your whole ride. - Softer density on the outside for superior vibration damping. - Dual-density compound for improved comfort and bar adherence. - Softer, thicker padding for heightened comfort. - Higher-density inner core for secure bar attachment. - Textured pattern provides non-slip performance. - Diameter: 30mm
Specialized Rhythm Lite Tire 20-inch
$29.95
When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt. - Casing: 30 TPI - Bead: Wire
Specialized Thorn-Resistant Schrader Valve Tube
$12.99 - $15.95 $15.95 Up to 19% Off
We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.
Salt Plus PROPELLER BRAKE PADS BLACK
$13.99
Material: high-quality soft rubber compound Colors: black, clear black Features: comes with all required hardware (bolts, etc.), midlength pad size Weight: 54g (0.11lb / 1.9oz)
S & M Bikes Elevenz Handlebar
$149.95
If your bars got any higher than S&M's Elevenz Handlebars, they'd be atmospheric. With 11 inches of rise and a width of 30 inches, these big bars give you all the control you need and then some. The Elevens are made from tough 4130 chromoly so you can air it out with confidence.
Odyssey Gyro G3 Lower Cables
$14.95
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Odyssey Slim-By-Four Brake Pads
$13.95
The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.
ODI Flangeless Longneck
$19.95
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included
Merritt BMX Justin Care Upload Stem
$74.95
Justin wanted a top load stem that could be run upside down and still raise your bars. Best of both worlds, clean looks and rise. Going with forged 6061 aluminum construction for both the body and cap produced a super strong stem with a design that wouldn’t be feasible with machining and also keeps the price low. 48mm reach and 21mm rise.
La Casa 20
$119.99 $149.95 20% Off
La Casa Wheels are packed with features including smooth rolling sealed bearings, forged anodized hub shells with color matched rims, Female axles and clean laser etched logos. Deliver great value and quality to your customers with these sturdy, affordable and colorful wheels. Axle: 3/8" (10mm) Hardware: Chromoly Hub Shell Bearings: 6000 (x2) Weight (oz): N/A ERD:395mm
Kenda Kutlas 20
$44.95
20" X 2.25 KUTLAS [K939] - Etrto: 57-406. - Wire bead. - TPI: 60 - PSI: 120. - Black.
KMC HL710L Half-Link BMX Chain
$39.95 - $41.95
- 1/2" x 1/8" - 100 Links - Single-speed - BMX Racing, Freestyle - Hollow Pins - Half Link Design
KMC Z1 BMX Chain
$19.95
Z410 or S1 (New version) is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g
KMC Z410 or S1 BMX Chain
$19.95
Z410 or S1 (New version) is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g
KMC Z510H BMX Chain
$29.95 - $49.95
Rep your country and sport fun colors on your fixie with KMC's Z510H Chain. - 1/2" x 1/8" - 112 Links - Single-speed - 1/8" Track Bikes & BMX Racing, Freestyle - Heavy Duty
Generic 20
$59.95
- "Flip-Flop" 14mm hub on an affordable, but tough Y22 rim - Will accept conventional 16T-22T Single freewheel or 13T-14T compact freewheel. - Black Aluminum
Generic 8T - 19MM Sealed MID BMX Bottom Bracket with 19mm Spindle
$49.95
- 8T - 19mm Cr-Mo Spindle - 2xMid-Type Sealed Bearing
Generic Bicycle Tubes - All Sizes, Schrader and Presta
$8.95 - $19.95
Bicycle Tube. Schraeder or Presta Valves. All sizes we stock.
Fitbikeco Benny L Stem
$59.99 $72.95 18% Off
The Fit Benny L stem is the Ben Lewis signature frontload stem made from cold forged aluminum for maximum strength. It features a hollowed out center section, recessed top and bottom section for weight savings, chamfered edges, debossed Fit logo on the faceplate and a short 46mm reach for a quick and responsive front end feel. ξ Reach: 46mm Stack Height: 32mm Rise: 5mm Clamp Bolts: 8x1.25mm (x4) Pinch Bolts: 8x1.25mm (x2) Weight: 9.8 oz
Page 1 of 2 Next page