Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$6.95 - $7.95
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment.
- External varus/valgus cleat wedge
- Provides one-degree of varus/valgus correction
- Shaped to fit SPD-SL, Look Keo and Speedplay
These come with the appropriate longer mounting screws.
$8.95
Use them as originally intended with toe clips or as handy securing fixtures for a whole host of other tasks, cycling-specific or not.
Constructed from tough and durable Nylon webbing toe straps with and chrome-plated steel securing buckles.
12mm width / 470mm length (can be trimmed to size)
Sold as a pair
Colour: Black
Weight: 50g
$9.95
STRAPLESS TOE-CLIPS
- Material: Technopolymer.
- Pronged toe-clip: No strap.
- S/M < = Eur-42, US-9 & L/XL > Eur-42, US-9.
- Supplied with mounting hardware.
- Are adjustable on all flat pedals.
- Weight: S/M- 128g / L/XL- 142g.
$10.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
$12.95
These 3mm stackers can easily correct the common issue of leg length inequality.
- External cleat lift for addressing leg length inequality.
- Shaped to fit SPD-SL, Look Keo, and Speedplay Zero pedals.
- Includes longer screws.
$14.95
- Wellgo resin Toe Clips and Nylon Straps.
- For mountain and hybrid bikes.
$16.95
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs
$19.98
$29.95
33% Off
Lightweight cleat covers compatible with both fixed and floating Shimano SPD-SL cleats
Covers protect cleats from wear and make walking easier
Prevents mud and dirt from building up inside cleats
Easy to attach, remove, and store
High-quality thermoplastic elastomer construction; made in the USA
$19.99
Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
$19.99 - $49.95
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$24.95
- Pedal Adapters.
- No more sliding of your clipless pedals.
- With the Pedal Plates you can easily turn your clipless pedals into flats for use with all types of shoes.
- Light & compact.
- 100% recycled materials.
$24.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.
$25.99
Replacement cleats for RXS pedals, featuring "Cafe" profiling, which means that when you walk into your local coffee shop for a mid-ride refreshment, you don't risk slipping and falling on the tile floor.
$29.95
Origin-8's Look Delta Cleats are compatible with Look Delta-style pedals.
- These cleats use the Look/SPD-SL bolt pattern.
$29.95
Exustar Cleats compatible with Look Keo System
- Engineering carbon fiber injection body
- Weight of 24 grams per cleat
- 7-degree floating arc
$33.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals.
- Included with mountain pedal models numbered "2" and "4."
- Release angle of 10 degrees and is compatible with all two-hole cycling shoes.
- Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$33.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$33.00
- Works with all RXS and Impact pedals.
- Five degrees of heel float and 2.5mm of lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$33.00
- Pedal Grip pins/bolts and 4 tension screws TIME SPECIALE 8/12
$33.99
- Allows a customer to replace their cleats.
- Two replacement cleats in box
$33.99
- Christophe Vintage toe-clip
- Celebrating 130 years of history
- Steel cage
- Chrome finish
- 01: S/M; -02: L/XL
$35.00
Replacement charging clips and Y-shaped cable for the POWRLINK ZERO Power Pedal System
In the box
- Y-shaped charging cable
- Charging clips (x2)"
$35.99
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
$35.99
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats.
- Not compatible with Shimano PD-M858 (XTR) SPD pedals
$38.99
A revolution in performance and reliability.
- The kit includes premium internal components:
- Inner spindle seal x 2
- Outer spindle seal x 2
- Inner Igus solid bearing x 2
- Outer Enduro cartridge bearing x 2
- Spindle nut x 2
- Outer bearing carrier x 2
- Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)
$39.95
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy.
Pedal Refresh Kit includes:
-Enduro catridge bearings
- Igus LL-glide bearings
- Double seal system (internal and external seals)
- Hex alloy end caps
- O-rings
- Nuts
- Sleeve bushings
- Bearing removal tool
Compatible with the following pedals (2010-present):
- Eggbeaters
- Candys
- Mallets
- 5050s
$39.99
Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup.
- Weight (pair): 86 grams
- Shoe compatibility: LOOK/SPD-SL
- Release angle: 15 or 20 degrees
$40.95
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.
Page 1 of 2
Next page