Parts & Accessories

$24.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.

$24.99 - $41.99
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$39.99
- Woven nylon fiber material
- Double hold system for strength
- Durable for urban or MTN riding
- Fits most BMX platform style pedals
- Anti-slip adjustable design

$33.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

$43.99
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
- 0° Float/fixed type = SM-SH10
- 2° Float/front center pivoting type = SM-SH12
- 6° Float = SM-SH11
$10.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$13.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.

$43.95 - $44.95
Cleats with a more forgiving 10-deg release.
- Optimized for novice riders or those new to clip-in pedals
- 10-deg release angle makes it easier to unclip
- 2-hole bolt pattern for mountain bike shoes
- Plastic spacing shims included
- Compatible with all Crankbrothers clip-in pedals

$12.95
These 3mm stackers can easily correct the common issue of leg length inequality.
- External cleat lift for addressing leg length inequality.
- Shaped to fit SPD-SL, Look Keo, and Speedplay Zero pedals.
- Includes longer screws.

$6.95
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment.
- External varus/valgus cleat wedge
- Provides one-degree of varus/valgus correction
- Shaped to fit SPD-SL, Look Keo and Speedplay
- Package includes eight wedges

$39.99
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

$35.99
The ATAC cleats are developed for the TIME mountain bike pedal range (MX and XC range). By switching right and left cleats, you can choose two options for the release angle: 13-degrees or 17-degrees.
- Weight: 45g/pair

$33.00
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.

$13.95
• A handy plastic plate with integrated reflectors
that’ll securely snap into a clipless pedal
mechanism providing an flat pedal platform
• Compatible with Wellgo M094 pedals but may fit other brands (uses a Shimano SPD compatible cleat interface)
• Weight: 60 g / pr

$25.99
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out.
- Weight: 44g/pair

$13.95
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$19.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

$61.99
- Compatible with all Shimano SPD type pedals
- SPD cleat design to be assembled on LOOK style shoes

$49.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals.
- Pins available separately

$334.99
- Allows a customer to convert any Rally 100 or 200 product over to RK/RS/XC pedal body styles.

$29.95
Origin-8's Look Delta Cleats are compatible with Look Delta-style pedals.
- These cleats use the Look/SPD-SL bolt pattern.

$47.99
Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup.
- Weight (pair): 86 grams
- Shoe compatibility: LOOK/SPD-SL
- Release angle: 15 or 20 degrees

$6.95 - $7.95
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment.
- External varus/valgus cleat wedge
- Provides one-degree of varus/valgus correction
- Shaped to fit SPD-SL, Look Keo and Speedplay
These come with the appropriate longer mounting screws.

$33.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range.
- They allow angular and lateral freedom in order to respect the natural movements of your legs and joints.
- You can also adjust the Q-factor (by switching the cleats)
- The Bi-material brings more durability when walking with the cleats.
- These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
Page 1 of 2
Next page